Port Forwarding the 2wire 1070-B Router for QSee QSD42208


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View 2wire Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > 2wire > 1070-B > QSee QSD42208

Login to the 2wire 1070-B Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your 2wire 1070-B Router IP Address

It's ok if you don't know your 2wire 1070-B router's internal IP address. You can find it by doing one of the following:

Login To The 2wire 1070-B Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

2wire 1070-B Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your 2wire 1070-B router. By default the IP address should be set to 192.168.1.254.

How to Port Forward QSee QSD42208 on the 2wire 1070-B


Having trouble forwarding ports on the 2wire 1070-B?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your 2wire 1070-B router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Press Menu on your remote control to get in to your DVR's main menu.

In main menu, move the Active Frame to the Network icon and press ENTER.

Write down the number that is in the IP, Gateway, and Mask settings. Do not change the Gateway and Mask settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is 192.0.0.64. The 64 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 64. So the new octet in this example would be 114, and the ip address in this example would be 192.0.0.114. Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

2wire 1070-B Router Port Forwarding Screenshots

Now that you are logged in to your 2wire 1070-B router you should see the following:

Look for your password on the bottom of your router or in the paperwork that came with your router.

2wire 1070-B Screenshot 1

Click the Firewall button.

2wire 1070-B Screenshot 2

Click the Firewall Settings button.

2wire 1070-B Screenshot 3

Use the Select a computer box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network.

Click the Add a new user-defined application link.

2wire 1070-B Screenshot 4

Forward Ports 80 on the 2wire 1070-B

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD42208 requires you to forward the 80,8000 ports. Go ahead and enter the settings shown above into the Edit Application menu and then click Add Definition.

1070-B5.jpg
  Application Name:  
1070-B6.jpg
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600
  
  Map to Host Port: Default= the same port as
defined above
  
1070-B7.jpg


Forward Ports 8000 on the 2wire 1070-B

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

1070-B5.jpg
  Application Name:  
1070-B6.jpg
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600
  
  Map to Host Port: Default= the same port as
defined above
  
1070-B7.jpg

Click the Back button.

2wire 1070-B Screenshot 3

Select the applications you just created in the Applications list, then click the Add button to move them to the Hosted Applications box.

When you are finished, click the Done button at the bottom of your screen.

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD42208 on the 2wire 1070-B you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

2wire 1070-B Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our 2wire Router Screenshots. We have the Internets largest collection of Router Screenshots.