If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.[an error occurred while processing this directive]
To setup port forwarding on the 3com 3CP4130 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your 3com 3CP4130 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your 3com 3CP4130 router. By default the IP address should be set to 192.168.200.254.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your 3com 3CP4130 router.
Please visit our Default 3com Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your 3com 3CP4130 router username and password, use our How to Reset a Router Password guide to set your 3com 3CP4130 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
BitLord chooses a random port to listen on when you install it. Before we can forward ports for BitLord, we need to find out what port BitLord is using. Go ahead and open BitLord.
In the menu at the top of your screen, click Options. Clicking Options will cause a menu to drop down. In this new menu click Preferences.
In the menu on the left the top option Connection should be selected. On the right hand side of this window you should see a Listen Port option. That is the port that you need to forward. You can change it if you like. Please enter the listen port below.
There is one more thing we need to do. We need to shut off the UPNP of BitLord.
In the menu on the left hand side under Advanced, click Connection. There should be an Enable UPnP Port Mapping(XP only) checkbox on the right hand side. Make sure it is unchecked.
Now that you are logged in to your 3com 3CP4130 router you should see the following:
Click the Configuration link near the left of the page.
Click the Remote Site Profiles button near the center of the page.
There is most likely only one option in the list on this page. Go ahead and click it, then click Modify.
Click the Next button near the bottom of the page.
Clicking the TCP or UDP button on this page will bring you to the page that we will use to forward ports.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BitLord requires you to forward the ports you entered above. If the text above says UDP instead of TCP, go back to the previous page and select UDP to get the proper configuration page. Go ahead and enter the settings shown above into the Remote Site Name: add menu and then click Add.
|Remote Site Name: Add|
|Public TCP Port:|
|Private IP Address:|
|Private TCP Port:|
When you're finished, click Save Configuration near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for BitLord on the 3com 3CP4130 you should test to see if your ports are forwarded correctly.