Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the 3com 3CRWER200-75


What is Port Forwarding?
What is Port Triggering?




 

To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Please enter the static ip you want to forward to:

192.168.1.




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Log in button to log in to your router.




Click the Firewall link near the left side of the page.




Enter the name of the program into the Application Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. If you are forwarding a single port, enter that port number into the Start Port and the End Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port box. Then enter the highest number of that range into the End Port box. Select the protocol type using the Protocol checkboxes. Enter the ip address to forward these ports to into the To IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Put a checkmark in the Enabled checkbox.

When you're finished, click Save near the right side of the screen to save your changes.

And that's it! You're done!