Port Forwarding Qsee QSDT88GRTC-320 on the 3com 3c510

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > 3com > 3c510 > Qsee QSDT88GRTC-320

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.


Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.


Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.



Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

3c510

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.2.1.

3c510

You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Log In button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

3c510

Click the Virtual Server link.

3c510


Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSDT88GRTC-320 requires you to forward the following ports: TCP(80,2000). Go ahead and enter the settings shown above into the Virtual Server menu.

ID Service Port Server IP Enable
1



Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.

ID Service Port Server IP Enable
2

When you are finished, click the Save button at the bottom of your screen.

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.