Network Utilities

Simple Alcatel Lucent Cellpipe 7130 Router Port Forwarding

Alcatel-Lucent Cellpipe7130 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Alcatel Lucent Cellpipe 7130 router.
  3. Navigate to the port forwarding section.
    • Click the Port Range Forwarding or the Virtual Server Advanced button to forward ports.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Alcatel-Lucent Cellpipe7130 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Alcatel-Lucent Cellpipe7130 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.2.1

In the picture above the address bar has 192.168.2.1 in it. Just replace all of that with the IP address of your Alcatel-Lucent Cellpipe7130 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.2.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Alcatel-Lucent Cellpipe7130

You should see a box prompting you for your username and password.

  • The Default Alcatel Lucent Cellpipe 7130 Router Username is: admin
  • The Default Alcatel Lucent Cellpipe 7130 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Alcatel-Lucent Cellpipe7130 router.

Alcatel-Lucent Usernames and Passwords

If your username and password do not work then please visit our Default Alcatel Lucent Router Passwords page.

If you still can't login to your router because you forgot your Alcatel-Lucent Cellpipe7130 router username and password, use our How to Reset a Router Password guide to set your Alcatel-Lucent Cellpipe7130 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Alcatel-Lucent Cellpipe7130

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Range Forwarding. To forward a single port, click Virtual Server Advanced.

Alcatel-Lucent Cellpipe7130

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Forwarding a Port Range

Put a name for this forward in the Application box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

If you are forwarding a single port, enter that port number into the Start Port and the End Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port box. Then enter the highest number of that range into the End Port box.

From the Protocol box select the protocol for the ports that you want to forward.

Enter the IP address that you are forwarding ports to in the IP Address box. This is either the IP address of a computer or the IP address of another device on your network.

Pick Enable from the Enable dropdown box.

Forwarding a Single Port

Alcatel-Lucent Cellpipe7130 port forward

Put a name for this forward in the Application box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

Put the same port number into both the Ext. Port and the Int. Port boxes.

Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.

Enter the IP address of the device that you want to forward ports to into the IP Address box. This can be either the IP address of your computer or the IP address of another device on your network.

Select Enable from the Enable dropdown box.

When you're finished, click Apply Changes near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Alcatel-Lucent Cellpipe7130 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Alcatel-Lucent Cellpipe7130 Router Screenshots

We also have the Internets largest collection of Router Screenshots.