Network Utilities

Easiest Way to Forward Ports on the Aztech DSL600EU Router

Aztech DSL600EU routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Aztech DSL600EU router.
  3. Navigate to the port forwarding section.
    • Click the Advanced button.
    • Click on Port Forwarding.
    • Click the Custom Rules link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Aztech DSL600EU router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Aztech DSL600EU router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Aztech DSL600EU router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Aztech DSL600EU

You should see a box prompting you for your username and password.

  • The Default Aztech DSL600EU Router Username is: admin
  • The Default Aztech DSL600EU Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Aztech DSL600EU router.

Aztech Usernames and Passwords

If your username and password do not work then please visit our Default Aztech Router Passwords page.

If you still can't login to your router because you forgot your Aztech DSL600EU router username and password, use our How to Reset a Router Password guide to set your Aztech DSL600EU router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Aztech DSL600EU

Click the Advanced button near the top of the page.

The menu on the left should change. In this new menu, click Port Forwarding.

Aztech DSL600EU

Click the Custom Rules link.

Aztech DSL600EU port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

In the Connection dropdown box select an available connection.

Verify that you have the Enable checkbox checked.

You need to name this entry in the Application box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

Select the required protocol for these ports from the Protocol dropdown box.

In the Source IP Address and Source Netmask box put 192.168.1.1.

Enter the IP address that you want to forward these ports to into the Destination IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

Verify that Destination Netmask is set to 192.168.1.1.

If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Destination Port Start, Destination Port Map box and the highest number of that range into the Destination Port End box. If you are only forwarding a single port number then enter that number into both the Destination Port Start, Destination Port Map and the Destination Port End boxes.

Click the Apply button when you are finished.

Aztech DSL600EU

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you are finished, click the Apply button.

When you're finished, click Save Settings near the left of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Aztech DSL600EU you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Aztech DSL600EU Router Screenshots

We also have the Internets largest collection of Router Screenshots.