Network Utilities

How to Port Forward a CBN CH7486E Router

CBN CH7486E routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your CBN CH7486E router.
  3. Navigate to the port forwarding section.
    • Click the Router link.
    • Click the Advanced link.
    • Click on Port Forwarding.
    • Click the Create IPv4 Rule button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your CBN CH7486E router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your CBN CH7486E router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your CBN CH7486E router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

CBN CH7486E Login

You should see a box prompting you for your username and password.

  • The Default CBN CH7486E Router Username is: admin
  • The Default CBN CH7486E Router Password is: password

Enter your username and password, and then click the Login button to log in to your CBN CH7486E router.

CBN Usernames and Passwords

If your username and password do not work then please visit our Default CBN Router Passwords page.

If you still can't login to your router because you forgot your CBN CH7486E router username and password, use our How to Reset a Router Password guide to set your CBN CH7486E router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

CBN CH7486E Status

Click the Router link near the top of the page.

CBN CH7486E LAN Settings

Click the Advanced link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

CBN CH7486E Port Forwarding

Click the Create IPv4 Rule button near the center of the page.

CBN CH7486E Port Forwarding Add

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Enter the IP address that you want to forward these ports to into the Local IP box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

If you are forwarding a range of ports then you need to enter the lowest number of the range into the Local Start Port and External Start Port boxes and the highest number of the range into the Local End Port and External End Port boxes. If you are only forwarding a single port then you can enter that same port number into the Local Start Port, Local End Port, External Start Port and External End Port boxes.

Select the required protocol for these ports from the Protocol dropdown box.

Enter the name of the program into the Description box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.

From the Enabled dropdown box select On.

Click the Apply button when you are all done.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the CBN CH7486E you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

CBN CH7486E Router Screenshots

We also have the Internets largest collection of Router Screenshots.