Dlink DI-704P-revB routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
While these steps might seem difficult at first, we will walk you through each step for your Dlink DI-704P-revB router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
Now we are going to login to your Dlink DI-704P-revB router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Dlink DI-704P-revB router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
Enter your username and password, and then click the Login button to log in to your Dlink DI-704P-revB router.
Dlink Usernames and Passwords
If your username and password do not work then please visit our Default D-Link Router Passwords page.
If you still can't login to your router because you forgot your Dlink DI-704P-revB router username and password, use our How to Reset a Router Password guide to set your Dlink DI-704P-revB router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Advanced button near the top of the page.
The menu on the left should change. In this new menu, click Virtual Server.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Put a number that has not yet been in the ID box.
Verify that you have the Enable checkbox checked.
Put the ports to forward into the Service Ports box.
You can enter the ports as a list 23,24,25, a range 500-600, or a combination of both 23,45,500-600.
Enter the IP address that you are forwarding ports to in the Server IP box. This is either the IP address of a computer or the IP address of another device on your network.
Put a dot into the Always radio button.
Click the Apply button when you are all done.
Your ports should now be open. It is time to test them.
Now that you have forwarded ports on the Dlink DI-704P-revB you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
We also have the Internets largest collection of Router Screenshots.