Network Utilities

Digitus DN-11004-N Router Open Port Guide

Digitus DN-11004-N2 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Digitus DN-11004-N router.
  3. Navigate to the port forwarding section.
    • Click the Virtual Server link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Digitus DN-11004-N2 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Digitus DN-11004-N2 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Digitus DN-11004-N2 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Digitus DN-11004-N2

You should see a box prompting you for your username and password.

  • The Default Digitus DN-11004-N Router Username is: Admin
  • The Default Digitus DN-11004-N Router Password is: Admin

Enter your username and password, and then click the Login button to log in to your Digitus DN-11004-N2 router.

Digitus Usernames and Passwords

If your username and password do not work then please visit our Default Digitus Router Passwords page.

If you still can't login to your router because you forgot your Digitus DN-11004-N2 router username and password, use our How to Reset a Router Password guide to set your Digitus DN-11004-N2 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Digitus DN-11004-N2

Click the Virtual Server link near the left of the page.

Digitus DN-11004-N2 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

You can leave Auswahl set to Manaul Setting.

You need to enter the IP address that you are forwarding ports to in the Weitergeleitete IP Addresse box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

If you are just forwarding a single port number then you can simply enter that same number into both the Top Port Bereich and the Bottom Port Bereich boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Top Port Bereich box and then enter highest number into the Bottom Port Bereich box.

Use the Protokoll dropdown box to select the protocol type of the ports you are forwarding.

When you're finished, click Bestatigen near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Digitus DN-11004-N2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Digitus DN-11004-N2 Router Screenshots

We also have the Internets largest collection of Router Screenshots.