Edimax BR-6216Mg routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Edimax BR-6216Mg router.
- Navigate to the port forwarding section.
- Click the NAT link.
- Click the Port Forwarding or the Virtual Server button to forward ports.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Edimax BR-6216Mg router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Edimax BR-6216Mg router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Edimax BR-6216Mg IP Address is: 192.168.2.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Edimax BR-6216Mg Router Username is: admin
- The Default Edimax BR-6216Mg Router Password is: 1234
Enter your username and password, and then click the Login button to log in to your Edimax BR-6216Mg router.
Edimax Usernames and Passwords
If your username and password do not work then please visit our Default Edimax Router Passwords page.
If you still can't login to your router because you forgot your Edimax BR-6216Mg router username and password, use our How to Reset a Router Password guide to set your Edimax BR-6216Mg router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the NAT link near the left of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Forwarding a Port Range
Enable the Enable Port Forwarding checkbox by putting a check in it.
Enter the IP address that you want to forward these ports to into the Private IP box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
Select the required protocol for these ports from the Type dropdown box.
If you are forwarding a range of ports then you need to enter the lowest number into the left Port Range box and the highest number into the right Port Range box. If you are only forwarding a single port then you can enter that same port number into both the left Port Range and the right Port Range boxes.
Put a name for this forward in the Comment box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.
When you are done click the Add button.
Forwarding a Single Port
Enable the Enable Virtual Server checkbox by putting a check in it.
You need to enter the IP address that you are forwarding ports to in the Private IP box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.
Enter the port to forward into both the Private Port and the Public Port boxes.
Select the protocol type of the ports you are forwarding from the Type box.
You need to name this entry in the Comment box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
Click the Add button when you are all done.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Edimax BR-6216Mg you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Edimax BR-6216Mg Router Screenshots
We also have the Internets largest collection of Router Screenshots.