Network Utilities

Fiber Home AN1020-25 Router Port Forwarding Steps

FiberHome AN1020-25 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Fiber Home AN1020-25 router.
  3. Navigate to the port forwarding section.
    • Click the Advanced Setup link.
    • Click on NAT.
    • Click on Virtual Servers.
    • Click the Add button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your FiberHome AN1020-25 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your FiberHome AN1020-25 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your FiberHome AN1020-25 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

FiberHome AN1020-25

You should see a box prompting you for your username and password.

  • The Default Fiber Home AN1020-25 Router Username is: admin
  • The Default Fiber Home AN1020-25 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your FiberHome AN1020-25 router.

FiberHome Usernames and Passwords

If your username and password do not work then please visit our Default Fiber Home Router Passwords page.

If you still can't login to your router because you forgot your FiberHome AN1020-25 router username and password, use our How to Reset a Router Password guide to set your FiberHome AN1020-25 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

FiberHome AN1020-25

Click the Advanced Setup link near the left of the page.

You should now see a new menu. In this new menu, click NAT.

You should now see a new menu. In this new menu, click Virtual Servers.

FiberHome AN1020-25

Click the Add button near the center of the page.

FiberHome AN1020-25

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Put a dot into the Custom Service radio button.

You need to name this entry in the Custom Service box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

Enter the IP address that you want to forward these ports to into the Server IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

If you are forwarding a range of ports, enter the lowest number of the range into the External Port Start and Internal Port Start boxes. Then enter the highest number of the range into the External Port End and Internal Port End boxes. If you are forwarding a single port, enter that port number into the External Port Start, External Port End, Internal Port Start and Internal Port End boxes.

From the Protocol box select the protocol for the ports that you want to forward.

Click the Apply/Save button when you are all done.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the FiberHome AN1020-25 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

FiberHome AN1020-25 Router Screenshots

We also have the Internets largest collection of Router Screenshots.