Network Utilities

Easiest Way to Forward Ports on the Multilaser RE024 Router

Multilaser RE024 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Multilaser RE024 router.
  3. Navigate to the port forwarding section.
    • Click the Virtual Server link.
    • Click on Reencaminhamento da faixa de porta.
    • Click the Add button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Multilaser RE024 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Multilaser RE024 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Multilaser RE024 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Multilaser RE024

You should see a box prompting you for your username and password.

  • The Default Multilaser RE024 Router Username is: admin
  • The Default Multilaser RE024 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Multilaser RE024 router.

Multilaser Usernames and Passwords

If your username and password do not work then please visit our Default Multilaser Router Passwords page.

If you still can't login to your router because you forgot your Multilaser RE024 router username and password, use our How to Reset a Router Password guide to set your Multilaser RE024 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Multilaser RE024

Click the Virtual Server link near the left of the page.

You should now see a new menu. In this new menu, click Reencaminhamento da faixa de porta.

Multilaser RE024 port forward

Click the Add button near the center of the page.

RE0244.jpg

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Start Port box and the highest number of that range into the End Port box. If you are only forwarding a single port number then enter that number into both the Start Port and the End Port boxes.

Enter the IP address to forward these ports to into the Para o endereco IP box. If you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box.

Select the protocol type of the ports you are forwarding from the Protocolo box.

Put a checkmark in the Ativar checkbox.

When you're finished, click Aplicar near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Multilaser RE024 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Multilaser RE024 Router Screenshots

We also have the Internets largest collection of Router Screenshots.