Virgin Media Netgear_VMDG485 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Netgear VMDG485 router.
- Navigate to the port forwarding section.
- Click the Advanced Settings button.
- Click the Port Forwarding link.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Virgin Media Netgear_VMDG485 router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free program will setup a static IP address for you. Download Network Utilities today!
- Or, follow our Static IP Address Setup guides.
After setting up a static ip address on your devices you need to login to your router.
Now we are going to login to your Virgin Media Netgear_VMDG485 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Netgear VMDG485 IP Address is: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
Look for your password on the bottom of your router or in the paperwork that came with your router.
Click the Advanced Settings button near the bottom of the page.
Click the Port Forwarding link near the bottom of the page.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
You need to name this entry in the Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
If you are just forwarding a single port number then you can simply enter that same number into both the Start Port and the End Port boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start Port box and then enter highest number into the End Port box.
Select the required protocol for these ports from the Protocol dropdown box.
Enter the IP address that you want to forward these ports to into the IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
Click the Add Rule button when you are all done.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Virgin Media Netgear_VMDG485 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Virgin Media Netgear_VMDG485 Router Screenshots
We also have the Internets largest collection of Router Screenshots.