Netopia 3347W-T routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Netopia 3347W-T router.
- Navigate to the port forwarding section.
- Click the Expert Mode link.
- Click the Yes~~ button.
- Click on Configure.
- Click on NAT.
- Click the Define Custom Service button.
- Click the Port Forwarding: Range of Ports radio button.
- Click the Next button.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Netopia 3347W-T router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free program will setup a static IP address for you. Download Network Utilities today!
- Another highly recommended way of getting a permanent IP address is to set up a DHCP Reservation.
- Or, follow our Static IP Address Setup guides.
With DHCP reservations you can manage your devices from your router. This centralizes the management of your network and helps prevent IP address conflicts. Using this method you do not have to log in to your devices separately.
Now we are going to login to your Netopia 3347W-T router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Netopia 3347W-T IP Address is: 192.168.1.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Netopia 3347W-T Router Username is: admin
- The Default Netopia 3347W-T Router Password is: 1234
Enter your username and password, and then click the Login button to log in to your Netopia 3347W-T router.
Netopia Usernames and Passwords
If your username and password do not work then please visit our Default Netopia Router Passwords page.
If you still can't login to your router because you forgot your Netopia 3347W-T router username and password, use our How to Reset a Router Password guide to set your Netopia 3347W-T router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Expert Mode link near the left of the page.
Click the Yes, enter expert mode button near the center of the page.
The menu on the left should change. In this new menu, click Configure.
You should now see a new menu. In this new menu, click NAT.
Click the Define Custom Service button near the center of the page.
Put a dot into the Port Forwarding: Range of Ports radio button.
Click the Next button.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Create a name for this forward and put it in the Service Name box. The name is only used as a reminder and has no effect on the port forward.
If you are only forwarding a single port number then enter that number into both the Base Host Port, Left Global Port Range and the Right Global Port Range boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Base Host Port, Left Global Port Range box and the highest number of that range into the Right Global Port Range box.
Select the protocol that you are forwarding in the Protocol radio button.
If you need both TCP and UDP forwarded then you need to create a duplicate configuration. One configuration has TCP selected and the other one has have UDP selected.
Click the Next button when you are all done.
Select the service you created from the Service Name drop down box.
Click the Enable button.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Netopia 3347W-T you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Netopia 3347W-T Router Screenshots
We also have the Internets largest collection of Router Screenshots.