The ports that need to be forwarded for NetX Command Center are listed here:
NetX Command Center - PC
- TCP: 81-89, 10001-10019
Setting Up a Port Forward for NetX Command Center
You may need to forward ports in your router when you use NetX Command Center. A port forward allows incoming connection requests from the internet to go straight to NetX Command Center.
By default routers do not allow incoming network requests. By forwarding ports you can work around this limitation.
Before Forwarding a Port
Make sure that you know these things before forwarding a port:
- The IP address of your router.
- Your computer's IP address.
- Each of the TCP and UDP ports that you need to forward.
Locate Your Router's IP Address
You can run our free Router Detector software to locate your router's IP address. Our Router Detector tool is free to use and is part of our Network Utilities software.
Otherwise, you can follow our guide Find Your Router IP Address.
Forwarding a Port for NetX Command Center
The easiest way to forward your ports is to use our Network Utilities software. Network Utilities lets you manage port forwards by putting them in when you need them and also removing the ones that you no longer need which maximized network security.
Alternatively you can do it by hand. The way to forward a port is:
- Log in to your router.
- Look for the port forwarding section in your router.
- Type your computer's IP address into the correct box in your router.
- Put the TCP and UDP ports for NetX Command Center in the corresponding boxes in your router.
Usually you have to reboot your router in order to save the changes.
You can choose your router from our list to see exactly how to forward ports for NetX Command Center:
List of Routers - Customized for NetX Command Center
That is the process required to forward ports in your router for NetX Command Center.