Network Utilities

How to Forward Ports in a Sitecom WL-153-NL Router

Sitecom WL-153-NL routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Sitecom WL-153-NL router.
  3. Navigate to the port forwarding section.
    • Click the Advanced Settings link.
    • Click the Port fw. link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Sitecom WL-153-NL router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Sitecom WL-153-NL router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Sitecom WL-153-NL router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Sitecom WL-153-NL

You should see a box prompting you for your username and password.

  • The Default Sitecom WL-153-NL Router Username is: admin
  • The Default Sitecom WL-153-NL Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Sitecom WL-153-NL router.

Sitecom Usernames and Passwords

If your username and password do not work then please visit our Default Sitecom Router Passwords page.

If you still can't login to your router because you forgot your Sitecom WL-153-NL router username and password, use our How to Reset a Router Password guide to set your Sitecom WL-153-NL router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Sitecom WL-153-NL

Click the Advanced Settings link near the top of the page.

Sitecom WL-153-NL

Click the Port fw. link near the top of the page.

Sitecom WL-153-NL port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Enable the Enable Port Forwarding checkbox by putting a check in it.

You need to enter the IP address that you are forwarding ports to in the Local IP box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

Select the required protocol for these ports from the Type dropdown box.

If you are only forwarding a single port number then enter that number into both the left Port range and the right Port range boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the left Port range box and the highest number of that range into the right Port range box.

Create a name for this forward and put it in the Comment box. The name is only used as a reminder and has no effect on the port forward.

After you are done click the Add button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Sitecom WL-153-NL you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sitecom WL-153-NL Router Screenshots

We also have the Internets largest collection of Router Screenshots.