SparkLAN WX-6615M routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your SparkLAN WX-6615M router.
- Navigate to the port forwarding section.
- Click the Virtual Servers link.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your SparkLAN WX-6615M router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your SparkLAN WX-6615M router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default SparkLAN WX-6615M IP Address is: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default SparkLAN WX-6615M Router Username is: blank
- The Default SparkLAN WX-6615M Router Password is: blank
Enter your username and password, and then click the Login button to log in to your SparkLAN WX-6615M router.
SparkLAN Usernames and Passwords
If your username and password do not work then please visit our Default SparkLAN Router Passwords page.
If you still can't login to your router because you forgot your SparkLAN WX-6615M router username and password, use our How to Reset a Router Password guide to set your SparkLAN WX-6615M router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Virtual Servers link near the left of the page.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
- Browsing our List of Games
- Check out our our List of Games by Genre
- See our List of all Applications
Click the Clear Form button.
In the Enable checkbox put a checkmark.
You need to name this entry in the Enable box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
Use the PC (Server) box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
In the Protocol box select the protocol that you want to forward these ports over.
If you are forwarding a range of ports then you need to enter the lowest number of that range into the left hand Internal (WAN) Ports and External (WAN) Ports boxes and the highest number of that range into the right hand Internal (WAN) Ports and External (WAN) Ports boxes.
If you are forwarding a single port then you can enter that same port number into both of the Internal (WAN) Ports and both of the External (WAN) Ports boxes.
When you are done click the Add as new Server button.
Most people will never need to use this, but I'm going to explain why they have Internal Port and External Port here.
The Internal Port and External Port entries are actually rather useful. They are there so you can direct traffic at two devices on your network.
Let's say that you have two devices running Ftp servers on your network. Let's call these devices device one(192.168.0.1) and device two(192.168.0.1).
Let's also say both these ftp servers are running on port 21. Okay we setup your router to forward port 21 to device one(192.168.0.1:21).
So every external IP address request from ftp goes to device one. How do we get to the second device? Well the Internal Port and External Port entries allow us to specify another outside port to connect to our internal port 21. Lets make the additional port, port 30. We would now setup a rule in the router with the Public Port set to 30 and the Private port set to 21. The IP address in that rule would be 192.168.0.1. So when you wanted to ftp to device two you would specify port 30 in your ftp client.
The router would see these requests coming in on port 30 and forward them to (192.168.0.1:21). This would allow you to ftp to both devices.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the SparkLAN WX-6615M you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
SparkLAN WX-6615M Router Screenshots
We also have the Internets largest collection of Router Screenshots.