Network Utilities

Easiest Way to Forward Ports on the UTStarcom UT4110A Router

UTStarcom UT4110A routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your UTStarcom UT4110A router.
  3. Navigate to the port forwarding section.
    • Click the Services button.
    • Select NAT Rule Entry in the drop down.
    • Click the Add button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your UTStarcom UT4110A router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your UTStarcom UT4110A router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your UTStarcom UT4110A router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

UTStarcom UT4110A

You should see a box prompting you for your username and password.

  • The Default UTStarcom UT4110A Router Username is: admin
  • The Default UTStarcom UT4110A Router Password is: admin

Enter your username and password, and then click the Login button to log in to your UTStarcom UT4110A router.

UTStarcom Usernames and Passwords

If your username and password do not work then please visit our Default UTStarcom Router Passwords page.

If you still can't login to your router because you forgot your UTStarcom UT4110A router username and password, use our How to Reset a Router Password guide to set your UTStarcom UT4110A router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

UTStarcom UT4110A

Click the Services button near the top of the page.

UTStarcom UT4110A

Select NAT Rule Entry from the NAT Options drop down box.

UTStarcom UT4110A

Click the Add button near the bottom of the page.

UTStarcom UT4110A

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Choose RDR from the Rule Flavor dropdown box.

Pick a number that has not yet been used and put it into the Rule ID box.

Leave IF Name set to All.

Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.

Enter the IP address that you want to forward these ports to into the Local Address From and Local Address To box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

Leave Global Address From and Global Address To set to 192.168.1.1.

Verify that Destination Port From, Destination Port To and Local Port is set to Any Other Port.

If you are forwarding a single port, enter that port number into the Local Port, Destination Port From and the Destination Port To boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Local Port, Destination Port From box. Then enter the highest number of that range into the Destination Port To box.

Click the Submit button when you are done.

UTStarcom UT4110A

Click the Close button near the bottom of the page.

Click the IP Filter link near the top of the page.

UTStarcom UT4110A

Select Low from the Security Level drop down box.

Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.

Click the Submit button near the bottom of the page.

Click the Admin button near the top of the page.

You should now see a new menu. In this new menu, click Commit & Reboot.

UTStarcom UT4110A port forward

Click the Commit button near the bottom of the page.

Click the Reboot button near the bottom of the page.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the UTStarcom UT4110A you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

UTStarcom UT4110A Router Screenshots

We also have the Internets largest collection of Router Screenshots.