Network Utilities

Westell C90-610030-06 Router Port Forwarding Instructions

Westell C90-610030-06 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Westell C90-610030-06 router.
  3. Navigate to the port forwarding section.
    • Click the Home Network button.
    • Click the NAT / Gaming button.
    • Click the Define Custom Service button.
    • Click the Port Forwarding radio button.
    • Click the next button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Westell C90-610030-06 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Westell C90-610030-06 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.254

In the picture above the address bar has 192.168.1.254 in it. Just replace all of that with the IP address of your Westell C90-610030-06 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.254

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Westell C90-610030-06

You should see a box prompting you for your username and password.

  • The Default Westell C90-610030-06 Router Username is: admin
  • The Default Westell C90-610030-06 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Westell C90-610030-06 router.

Westell Usernames and Passwords

If your username and password do not work then please visit our Default Westell Router Passwords page.

If you still can't login to your router because you forgot your Westell C90-610030-06 router username and password, use our How to Reset a Router Password guide to set your Westell C90-610030-06 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Westell C90-610030-06

Click the Home Network button near the top of the page.

Westell C90-610030-06

Click the NAT / Gaming button near the right of the page.

Westell C90-610030-06

Click the Define Custom Service button near the center of the page.

Westell C90-610030-06

Put a dot into the Port Forwarding radio button.

Click the next button near the bottom of the page.

Westell C90-610030-06 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

You need to name this entry in the Service Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

If you are forwarding a single port, enter that port number into the Base Port Range, Left Global Port Range and the Right Global Port Range boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Base Port Range, Left Global Port Range box. Then enter the highest number of that range into the Right Global Port Range box.

Choose the protocol that you are forwarding from the Protocol radio button.

In this router if you need both TCP and UDP forwarded then you need to create a duplicate configuration. One of the configurations has TCP selected and the other one has UDP selected.

Click the next button when you are done.

Westell C90-610030-06

Select the application you created using the Custom Services drop down box. Then click enable to enable it.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Westell C90-610030-06 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Westell C90-610030-06 Router Screenshots

We also have the Internets largest collection of Router Screenshots.