Port Forwarding XBOX360 Naruto The Broken Bond on the 2wire 2701HG-B

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > 2wire > 2701HG-B > XBOX360 Naruto The Broken Bond
2701HG-B

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 172.16.0.1.

2701HG-B

Click the Firewall button.

2701HG-B

Click the Firewall Settings button.

2701HG-B

Use the Select a computer box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network.

Click the Add a new user-defined application link.

2701HG-B



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Naruto The Broken Bond requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Edit Application menu and then click Add Definition.

2701HG-B5.jpg
  Application Name:  
2701HG-B6.jpg
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600
  
  Map to Host Port: Default= the same port as
defined above
  
2701HG-B7.jpg




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

2701HG-B5.jpg
  Application Name:  
2701HG-B6.jpg
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600
  
  Map to Host Port: Default= the same port as
defined above
  
2701HG-B7.jpg

Click the Back button.

2701HG-B

Select the applications you just created in the Applications list, then click the Add button to move them to the Hosted Applications box.

When you are finished, click the Done button at the bottom of your screen.

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.