Port Forwarding Limewire on the 3com 3CR858-91

What is Port Forwarding?

View all Router Screenshots.

Before we can forward ports for LimeWire, we need to figure out what ports LimeWire is using. Here is a brief walkthrough on how to do that. Go ahead and open up LimeWire.

Click Tools in the menu at the top of your screen. In the list that drops down click Options.

On the left side of this page click the plus sign in front of Advanced. Another list should have appeared under advanced. Click the Firewall Config option in this new list. In the Router Configurations section we want to put a dot into the Manual Port Forward radio button. Now we need to select a port to use for LimeWire. It doesn't really matter what port you choose, but a port between 10000 and 60000 would be a good idea. These higher numbered ports are rarely blocked by ISPs. Once you have chosen a port please enter that port number into the box to the right of the Manual Port Forward box. That port should also be put into the Listen on Port box. I also need to you enter that port number into the box below.

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Log in button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

Click the Firewall link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Servers.

Click the Add button near the bottom of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Limewire requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.