Port Forwarding QSee QC DVRs on the 3com 3cr860-95

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > 3com > 3cr860-95 > QSee QC DVRs

Configuring the DVR to pick up an IP address

  • Right Click and select Main Menu
  • Select Setting
  • Select Network
  • Check the box next to DHCP and click Save

Power Cycle the DVR

  • Select Shutdown
  • Set to Restart system and click OK

Identifying the IP address

  • Right Click and select Main Menu
  • Select Setting
  • Select Network
  • Uncheck the box next to DHCP, write down the IP Address, Subnet Mask, and Gateway, and click Save

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

3cr860-95

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

3cr860-95

You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Log in button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

3cr860-95

Click the Firewall link.

3cr860-95

Click the New button.

3cr860-95

Select Custom from the Local Service drop down box.

3cr860-95


Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QC DVRs requires you to forward the 80,37777,37778 ports. Go ahead and enter the settings shown above into the Virtual Server Settings menu and then click Add.

3cr860-95
3cr860-95 Server IP Address 3cr860-95
Local Service
Custom Service Name
Specify Custom Service Ports
Specify Protocol
Access From the Interent:
All WAN PCs can access this server
Authorized Remote IP Address(es):
3cr860-95

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.