Network Utilities

Fastest A-Link RoadRunner 64 Router Open Port Guide

A-Link Roadrunner64 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your A-Link RoadRunner 64 router.
  3. Navigate to the port forwarding section.
    • Click the WAN IP Filter link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your A-Link Roadrunner64 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your A-Link Roadrunner64 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


10.0.0.2

In the picture above the address bar has 10.0.0.2 in it. Just replace all of that with the IP address of your A-Link Roadrunner64 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 10.0.0.2

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

A-Link Roadrunner64

You should see a box prompting you for your username and password.

  • The Default A-Link RoadRunner 64 Router Username is: admin
  • The Default A-Link RoadRunner 64 Router Password is: password

Enter your username and password, and then click the Login button to log in to your A-Link Roadrunner64 router.

A-Link Usernames and Passwords

If your username and password do not work then please visit our Default A-Link Router Passwords page.

If you still can't login to your router because you forgot your A-Link Roadrunner64 router username and password, use our How to Reset a Router Password guide to set your A-Link Roadrunner64 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

A-Link Roadrunner64

Click the WAN IP Filter link near the left of the page.

A-Link Roadrunner64 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Make sure that the Enable checkbox is checked.

Enter the IP address that you want to forward these ports to into the LAN IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

Go ahead and leave the WAN IP Address box empty.

The protocol that you want to forward is selected from the Protocol box.

Put the ports to forward into the Ports box.

You can enter the ports as a list 23,24,25, a range 500-600, or a combination of both 23,45,500-600.

When you're finished, click Update near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the A-Link Roadrunner64 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

A-Link Roadrunner64 Router Screenshots

We also have the Internets largest collection of Router Screenshots.