Network Utilities

Fastest ADDON WBR9200 Router Port Forwarding Instructions

ADDON WBR9200 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your ADDON WBR9200 router.
  3. Navigate to the port forwarding section.
    • Click the Advanced link.
    • Click on Virtual Servers.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your ADDON WBR9200 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your ADDON WBR9200 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.254

In the picture above the address bar has 192.168.1.254 in it. Just replace all of that with the IP address of your ADDON WBR9200 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.254

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

ADDON WBR9200

You should see a box prompting you for your username and password.

  • The Default ADDON WBR9200 Router Username is: blank
  • The Default ADDON WBR9200 Router Password is: blank

Enter your username and password, and then click the Login button to log in to your ADDON WBR9200 router.

ADDON Usernames and Passwords

If your username and password do not work then please visit our Default ADDON Router Passwords page.

If you still can't login to your router because you forgot your ADDON WBR9200 router username and password, use our How to Reset a Router Password guide to set your ADDON WBR9200 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

ADDON WBR9200

Click the Advanced link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Servers.

ADDON WBR9200 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

In the Enable Virtual Servers checkbox put a checkmark.

Enter the IP address that you want to forward these ports to into the Local IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

In the Protocol box select the protocol that you want to forward these ports over.

If you are forwarding a range of ports then you need to enter the lowest number into the left Port Range box and the highest number into the right Port Range box. If you are only forwarding a single port then you can enter that same port number into both the left Port Range and the right Port Range boxes.

Put a name for this forward in the Description box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

Click the Save button when you are all done.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the ADDON WBR9200 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

ADDON WBR9200 Router Screenshots

We also have the Internets largest collection of Router Screenshots.