DSE-Dick Smith Elec XH7916-Rel9P-B1 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Dick Smith Elec DSE XH 7916 router.
- Navigate to the port forwarding section.
- Click the Virtual Servers link.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your DSE-Dick Smith Elec XH7916-Rel9P-B1 router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your DSE-Dick Smith Elec XH7916-Rel9P-B1 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Dick Smith Elec DSE XH 7916 IP Address is: 192.168.1.2
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Dick Smith Elec DSE XH 7916 Router Username is: admin
- The Default Dick Smith Elec DSE XH 7916 Router Password is: password
Enter your username and password, and then click the Login button to log in to your DSE-Dick Smith Elec XH7916-Rel9P-B1 router.
DSE-Dick Smith Elec Usernames and Passwords
If your username and password do not work then please visit our Default Dick Smith Elec Router Passwords page.
If you still can't login to your router because you forgot your DSE-Dick Smith Elec XH7916-Rel9P-B1 router username and password, use our How to Reset a Router Password guide to set your DSE-Dick Smith Elec XH7916-Rel9P-B1 router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Virtual Servers link near the left of the page.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Forwarding a Port Range
Pick a number that has not yet been used and put it into the ID# box.
If you are only forwarding a single port number then enter that number into both the Start and the End boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Start box and the highest number of that range into the End box.
Choose the protocol that you are forwarding from the Type radio button.
In this router if you need both TCP and UDP forwarded then you need to create a duplicate configuration. One of the configurations has TCP selected and the other one has UDP selected.
Enter the IP address that you want to forward these ports to in the IP Address box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.
When you are all done click the Add Port Range button.
Forwarding a Single Port
Enter a number that has not yet been used into the ID# box.
Enter the same port number to be forwarded into the Public and the Private boxes.
Select the protocol type using the Type radio button. If you need both TCP and UDP then create a duplicate configuration.
The first configuration needs to have TCP selected while the second one has UDP selected.
Enter the IP address of the device that you want to forward ports to into the IP Address box. This can be either the IP address of your computer or the IP address of another device on your network.
After you are done click the Add Port button.
Click the Save Settings link near the left of the page.
When you're finished, click Save near the center of the screen to save your changes.
Test if Your Ports are Open
Now that you have forwarded ports on the DSE-Dick Smith Elec XH7916-Rel9P-B1 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
DSE-Dick Smith Elec XH7916-Rel9P-B1 Router Screenshots
We also have the Internets largest collection of Router Screenshots.