Ericsson W20e routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Ericsson W20e router.
- Navigate to the port forwarding section.
- Click the NAT button.
- Click the Add Instance link.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Ericsson W20e router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Ericsson W20e router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Ericsson W20e IP Address is: 192.168.1.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Ericsson W20e Router Username is: user
- The Default Ericsson W20e Router Password is: user
Enter your username and password, and then click the Login button to log in to your Ericsson W20e router.
Ericsson Usernames and Passwords
If your username and password do not work then please visit our Default Ericsson Router Passwords page.
If you still can't login to your router because you forgot your Ericsson W20e router username and password, use our How to Reset a Router Password guide to set your Ericsson W20e router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the NAT button near the left of the page.
Click the Add Instance link near the bottom of the page.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
In the Protocol box select the protocol that you want to forward these ports over.
Put the same port number into both the NAT Port and the Server Port boxes.
Enter the IP address that you want to forward these ports to in the Server IP box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.
When you are finished, click the Apply button.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Ericsson W20e you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Ericsson W20e Router Screenshots
We also have the Internets largest collection of Router Screenshots.