Network Utilities

Fastest Green Packet WN-600 Router Port Forwarding Steps

GreenPacket WN-600 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Green Packet WN-600 router.
  3. Navigate to the port forwarding section.
    • Click the Firewall link.
    • Click on NAT.
    • Click the Port Mapping or the Virtual Server button to forward ports.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your GreenPacket WN-600 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your GreenPacket WN-600 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.22.1

In the picture above the address bar has 192.168.22.1 in it. Just replace all of that with the IP address of your GreenPacket WN-600 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.22.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

GreenPacket WN-600 Login

You should see a box prompting you for your username and password.

  • The Default Green Packet WN-600 Router Username is: admin
  • The Default Green Packet WN-600 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your GreenPacket WN-600 router.

GreenPacket Usernames and Passwords

If your username and password do not work then please visit our Default Green Packet Router Passwords page.

If you still can't login to your router because you forgot your GreenPacket WN-600 router username and password, use our How to Reset a Router Password guide to set your GreenPacket WN-600 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

GreenPacket WN-600 System Status

Click the Firewall link near the left of the page.

You should now see a new menu. In this new menu, click NAT.

GreenPacket WN-600 Virtual Server

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Mapping. To forward a single port, click Virtual Server.

imagestore

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Forwarding a Single Port

You need to enter the IP address that you are forwarding ports to in the Private iP box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

Enter the same port number to be forwarded into both the Private Port and the Public Port boxes.

From the Type box select the protocol for the ports that you want to forward.

Make up a name to put in the Comment box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.

Put a checkmark in the Enabled checkbox.

Forwarding a Port Range

GreenPacket WN-600 Port Mapping

Enter the IP address to forward these ports to into the Server IP box. If you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box.

If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Mapping Ports box and the highest number of that range into the Mapping Ports box. If you are only forwarding a single port number then enter that number into both the Mapping Ports and the Mapping Ports boxes.

Use the Type dropdown box to select the protocol type of the ports you are forwarding.

Put a name for this forward in the Comment box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

Make sure that the Enabled checkbox is checked.

When you're finished, click Modify near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the GreenPacket WN-600 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

GreenPacket WN-600 Router Screenshots

We also have the Internets largest collection of Router Screenshots.