Hawking HAWNR1 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Hawking HAWNR1 router.
- Navigate to the port forwarding section.
- Click the General Setup link.
- Click the NAT link.
- Click the Port Forwarding or the Virtual Server button to forward ports.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Hawking HAWNR1 router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Hawking HAWNR1 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Hawking HAWNR1 IP Address is: 192.168.1.254
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Hawking HAWNR1 Router Username is: admin
- The Default Hawking HAWNR1 Router Password is: 1234
Enter your username and password, and then click the Login button to log in to your Hawking HAWNR1 router.
Hawking Usernames and Passwords
If your username and password do not work then please visit our Default Hawking Router Passwords page.
If you still can't login to your router because you forgot your Hawking HAWNR1 router username and password, use our How to Reset a Router Password guide to set your Hawking HAWNR1 router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the General Setup link near the top of the page.
Click the NAT link near the left of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
- Browsing our List of Games
- Check out our our List of Games by Genre
- See our List of all Applications
Forwarding a Port Range
In the Enable Port Forwarding checkbox put a checkmark.
Enter the IP address that you want to forward these ports to in the Private IP box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.
Select the protocol type of the ports you are forwarding from the Type box.
If you are forwarding a range of ports, enter the lowest number of that range into the left Port Range box. Then enter the highest number of that range into the right  box. If you are forwarding a single port, enter that port number into the left Port Range and the right  boxes.
Make up a name to put in the Comment box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.
Click the Apply button when you are done.
Forwarding a Single Port
Make sure that the Enable Virtual Server checkbox is checked.
Enter the IP address that you are forwarding ports to in the Private IP box. This is either the IP address of a computer or the IP address of another device on your network.
Enter the same port number to be forwarded into the Private Port and the Public Port boxes.
Select the required protocol for these ports from the Type dropdown box.
Make up a name to put in the COmment box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.
After you are done click the Apply button.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Hawking HAWNR1 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Hawking HAWNR1 Router Screenshots
We also have the Internets largest collection of Router Screenshots.