Network Utilities

How to Port Forward a Kcorp KLG-575 Router

Kcorp KLG-575 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Kcorp KLG-575 router.
  3. Navigate to the port forwarding section.
    • Click the Access button.
    • Click on Virtual Server.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Kcorp KLG-575 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Kcorp KLG-575 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Kcorp KLG-575 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Kcorp KLG-575

You should see a box prompting you for your username and password.

  • The Default Kcorp KLG-575 Router Username is: admin
  • The Default Kcorp KLG-575 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your Kcorp KLG-575 router.

Kcorp Usernames and Passwords

If your username and password do not work then please visit our Default Kcorp Router Passwords page.

If you still can't login to your router because you forgot your Kcorp KLG-575 router username and password, use our How to Reset a Router Password guide to set your Kcorp KLG-575 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Kcorp KLG-575

Click the Access button near the left of the page.

The menu near the top should change. In this new menu, click Virtual Server.

Kcorp KLG-575 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Put a checkmark in the Enable checkbox.

Create a name for this forward and put it in the Name box. The name is only used as a reminder and has no effect on the port forward.

Select the required protocol for these ports from the Protocol dropdown box.

Put the same port number into both the Private Port and the Public Port boxes.

You need to enter the IP address that you are forwarding ports to in the LAN Server box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

When you are all done click the add button.

Most people will never need to use this, but I'm going to explain why they have Private Port and Public Port here.

The Private Port and Public Port entries are actually rather useful. They are there so you can direct traffic at two devices on your network.

Let's say that you have two devices running Ftp servers on your network. Let's call these devices device one(192.168.1.1) and device two(192.168.1.1).

Let's also say both these ftp servers are running on port 21. Okay we setup your router to forward port 21 to device one(192.168.1.1:21).

So every external IP address request from ftp goes to device one. How do we get to the second device? Well the Private Port and Public Port entries allow us to specify another outside port to connect to our internal port 21. Lets make the additional port, port 30. We would now setup a rule in the router with the Public Port set to 30 and the Private port set to 21. The IP address in that rule would be 192.168.1.1. So when you wanted to ftp to device two you would specify port 30 in your ftp client.

The router would see these requests coming in on port 30 and forward them to (192.168.1.1:21). This would allow you to ftp to both devices.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Kcorp KLG-575 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Kcorp KLG-575 Router Screenshots

We also have the Internets largest collection of Router Screenshots.