Network Utilities

Open Ports on the Keyteck NET-25GSU Router

Keyteck NET-25GSU routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Keyteck NET-25GSU router.
  3. Navigate to the port forwarding section.
    • Click the Services button.
    • Select NAT Rule Entry in the drop down.
    • Click the Add button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Keyteck NET-25GSU router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Keyteck NET-25GSU router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:

In the picture above the address bar has in it. Just replace all of that with the IP address of your Keyteck NET-25GSU router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to:

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Keyteck NET-25GSU

You should see a box prompting you for your username and password.

  • The Default Keyteck NET-25GSU Router Username is: admin
  • The Default Keyteck NET-25GSU Router Password is: password

Enter your username and password, and then click the Login button to log in to your Keyteck NET-25GSU router.

Keyteck Usernames and Passwords

If your username and password do not work then please visit our Default Keyteck Router Passwords page.

If you still can't login to your router because you forgot your Keyteck NET-25GSU router username and password, use our How to Reset a Router Password guide to set your Keyteck NET-25GSU router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Keyteck NET-25GSU

Click the Services button near the top of the page.

Keyteck NET-25GSU

Select NAT Rule Entry from the NAT Options drop down box.

Keyteck NET-25GSU

Click the Add button near the bottom of the page.

Keyteck NET-25GSU

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Choose RDR from the Rule Flavor dropdown box.

Enter a number that has not yet been used into the Rule ID box.

Leave IF Name set to All.

Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.

Enter the IP address that you want to forward these ports to in the Local Address From and Local Address To box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.

Verify that Global Address From and Global Address To is set to

The default for Destination Port From, Destination Port To and Local Port is set to Any Other Port. Leave it like this.

If you are just forwarding a single port number then you can simply enter that same number into both the Local Port and the Destination Port From boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Local Port box and then enter highest number into the Destination Port From box.

When you are done click the Submit button.

Keyteck NET-25GSU

Click the Close button near the bottom of the page.

Click the IP Filter link near the top of the page.

Keyteck NET-25GSU

Select Low from the Security Level drop down box.

Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.

Click the Submit button near the bottom of the page.

Click the Admin button near the top of the page.

You should now see a new menu. In this new menu, click Commit & Reboot.

Keyteck NET-25GSU port forward

Click the Commit button near the bottom of the page.

Click the Reboot button near the bottom of the page.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Keyteck NET-25GSU you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Keyteck NET-25GSU Router Screenshots

We also have the Internets largest collection of Router Screenshots.