Linksys WUSB54GS routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
While these steps might seem difficult at first, we will walk you through each step for your Linksys WUSB54GS router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
Now we are going to login to your Linksys WUSB54GS router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Linksys WUSB54GS router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.1.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
Enter your username and password, and then click the Login button to log in to your Linksys WUSB54GS router.
Linksys Usernames and Passwords
If your username and password do not work then please visit our Default Linksys Router Passwords page.
If you still can't login to your router because you forgot your Linksys WUSB54GS router username and password, use our How to Reset a Router Password guide to set your Linksys WUSB54GS router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Applications & Gaming link near the top of the page.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Enter the name of the program into the Application box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.
If you are just forwarding a single port number then you can simply enter that same number into both the Start and the End boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start box and then enter highest number into the End box.
Select the required protocol for these ports from the Protocol dropdown box.
Enter the IP address of the device that you want to forward ports to into the IP Address box. This can be either the IP address of your computer or the IP address of another device on your network.
Put a checkmark in the Enable checkbox.
When you're finished, click Save Settings near the bottom of the screen to save your changes.
Now that you have forwarded ports on the Linksys WUSB54GS you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
We also have the Internets largest collection of Router Screenshots.