Fastest Microlink Dsl Router Router Port Forwarding

Thumbnail image of Port Forward Staff
Port Forward Staff
September 19, 2018 (Last Updated: ) | Reading Time: 4 minutes

Microlink Microlink-Dsl-Router routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Microlink Dsl Router router.
  3. Navigate to the port forwarding section.
    • Click the Virtual Server link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Microlink Microlink-Dsl-Router router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Microlink Microlink-Dsl-Router router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.

The default Microlink Dsl Router IP Address is:

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Microlink Microlink-Dsl-Router
Screenshot of Microlink Microlink-Dsl-Router.

You should see a box prompting you for your username and password.

Enter your username and password, and then click the Login button to log in to your Microlink Microlink-Dsl-Router router.

Microlink Usernames and Passwords

If your username and password do not work then please visit our Default Microlink Router Passwords page.

If you still can't login to your router because you forgot your Microlink Microlink-Dsl-Router router username and password, use our How to Reset a Router Password guide to set your Microlink Microlink-Dsl-Router router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Microlink Microlink-Dsl-Router
Screenshot of Microlink Microlink-Dsl-Router.

Click the Virtual Server link near the left of the page.

Microlink Microlink-Dsl-Router
Screenshot of Microlink Microlink-Dsl-Router.

Step 4

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

Enter a number that has not yet been used into the ID box.

In the Port box type the port to forward.

Select the protocol type using the Port Type radio button. If you need both TCP and UDP then create a duplicate configuration.

The first configuration needs to have TCP selected while the second one has UDP selected.

Enter the IP address that you want to forward these ports to in the Host IP Address box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.

When you are done click the Add button.

Near the left of the page click the Inbound Policy link.

Microlink Microlink-Dsl-Router
Screenshot of Microlink Microlink-Dsl-Router.

The Src IP / Dest IP box cab be left blank.

Leave Src IP / Dest IP set to Any IP.

If you are forwarding a single port, enter that port number into both of the Src Port and both of the Dest Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the left hand Src Port and Dest Port boxes. Then enter the highest number of that range into the right hand Src Port and Dest Port boxes.

Select the protocol type of the ports you are forwarding from the Transport Protocol box.

Make sure that Enable Reverse NAT is set to No.

You can leave Filter Action set to Allow.

The default for Time Window Filtering is set to None. Leave it like this.

When you are all done click the Add/Modify button.

When you're finished, click Save Settings near the left of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Microlink Microlink-Dsl-Router you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Microlink Microlink-Dsl-Router Router Screenshots

We also have the Internets largest collection of Router Screenshots.

More From Port Forward