Microsoft MN-700 Router Port Forwarding

Thumbnail image of Port Forward Staff
Port Forward Staff
September 19, 2018 (Last Updated: ) | Reading Time: 4 minutes

Microsoft MN-700 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Microsoft MN-700 router.
  3. Navigate to the port forwarding section.
    • Click the Security link.
    • Click the Port Forwarding link.
    • Click the Set up persistent port forwarding link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Microsoft MN-700 router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

NordVPN faster than ever deal!

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Step 2

Now we are going to login to your Microsoft MN-700 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.

The default Microsoft MN-700 IP Address is: 192.168.2.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Microsoft MN-700
Microsoft MN-700.

You should see a box prompting you for your username and password.

Enter your username and password, and then click the Login button to log in to your Microsoft MN-700 router.

Microsoft Usernames and Passwords

If your username and password do not work then please visit our Default Microsoft Router Passwords page.

If you still can't login to your router because you forgot your Microsoft MN-700 router username and password, use our How to Reset a Router Password guide to set your Microsoft MN-700 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Microsoft MN-700
Microsoft MN-700.

Click the Security link near the left of the page.

Microsoft MN-700
Microsoft MN-700.

Click the Port Forwarding link near the center of the page.

Microsoft MN-700
Microsoft MN-700.

Click the Set up persistent port forwarding link near the center of the page.

Microsoft MN-700 port forward
Microsoft MN-700 port forward.

Step 4

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Verify that you have the Enable checkbox checked.

Make up a name to put in the Description box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.

If you are forwarding a range of ports then you need to enter the lowest number of that range into the left hand Inbound port and Private port boxes and the highest number of that range into the right hand Inbound port and Private port boxes.

If you are forwarding a single port then you can enter that same port number into both of the Inbound port and both of the Private port boxes.

Select the required protocol for these ports from the Type dropdown box.

You need to enter the IP address that you are forwarding ports to in the Private IP address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

Most people will never need to use this, but I'm going to explain why they have Inbound Port and Private Port here.

The Inbound Port and Private Port entries are actually rather useful. They are there so you can direct traffic at two devices on your network.

Let's say that you have two devices running Ftp servers on your network. Let's call these devices device one(192.168.2.1) and device two(192.168.2.1).

Let's also say both these ftp servers are running on port 21. Okay we setup your router to forward port 21 to device one(192.168.2.1:21).

So every external IP address request from ftp goes to device one. How do we get to the second device? Well the Inbound Port and Private Port entries allow us to specify another outside port to connect to our internal port 21. Lets make the additional port, port 30. We would now setup a rule in the router with the Public Port set to 30 and the Private port set to 21. The IP address in that rule would be 192.168.2.1. So when you wanted to ftp to device two you would specify port 30 in your ftp client.

The router would see these requests coming in on port 30 and forward them to (192.168.2.1:21). This would allow you to ftp to both devices.

When you're finished, click Apply near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Microsoft MN-700 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

More From Portforward