Network Utilities

Netcomm MyZone 3G24W Router Open Port Guide

Netcomm MyZone-3G24W routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Netcomm MyZone 3G24W router.
  3. Navigate to the port forwarding section.
    • Click the Switch to Advanced View link.
    • Click the Service link.
    • Click on Routing.
    • Click on NAT.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Netcomm MyZone-3G24W router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Netcomm MyZone-3G24W router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:

In the picture above the address bar has in it. Just replace all of that with the IP address of your Netcomm MyZone-3G24W router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to:

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Netcomm MyZone-3G24W

Click the Switch to Advanced View link near the bottom of the page.

Netcomm MyZone-3G24W

You should see a box prompting you for your username and password.

  • The Default Netcomm MyZone 3G24W Router Username is: admin
  • The Default Netcomm MyZone 3G24W Router Password is: blank

Enter your username and password, and then click the Login button to log in to your Netcomm MyZone-3G24W router.

Netcomm Usernames and Passwords

If your username and password do not work then please visit our Default Netcomm Router Passwords page.

If you still can't login to your router because you forgot your Netcomm MyZone-3G24W router username and password, use our How to Reset a Router Password guide to set your Netcomm MyZone-3G24W router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Netcomm MyZone-3G24W

Click the Service link near the top of the page.

You should now see a new menu. In this new menu, click Routing.

You should now see a new menu. In this new menu, click NAT.

Netcomm MyZone-3G24W port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Select the protocol type of the ports you are forwarding from the Protocol box.

If you are forwarding a range of ports, enter the lowest number of that range into the left hand Incoming Port Range and Destination Port Range boxes. Then enter the highest number of that range into the right hand Incoming Port Range and Destination Port Range boxes.

If you are forwarding a single port, enter that port number into both of the Incoming Port Range and both of the Destination Port Range boxes.

You need to enter the IP address that you are forwarding ports to in the Destination IP Address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

Click the Save NAT button when you are all done.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Netcomm MyZone-3G24W you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netcomm MyZone-3G24W Router Screenshots

We also have the Internets largest collection of Router Screenshots.