Network Utilities

Netgear DG632 Router Port Forwarding Guide

This is the open port guide for the Netgear DG632 v3. We also have the following related guides:

Pick the guide that most closely matches your router.

Netgear DG632 v3 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Netgear DG632 router.
  3. Navigate to the port forwarding section.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Netgear DG632 v3 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Netgear DG632 v3 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Netgear DG632 v3 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Netgear DG632v3

You should see a box prompting you for your username and password.

  • The Default Netgear DG632 Router Username is: admin
  • The Default Netgear DG632 Router Password is: password

Enter your username and password, and then click the Login button to log in to your Netgear DG632 v3 router.

Netgear Usernames and Passwords

If your username and password do not work then please visit our Default Netgear Router Passwords page.

If you still can't login to your router because you forgot your Netgear DG632 v3 router username and password, use our How to Reset a Router Password guide to set your Netgear DG632 v3 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Netgear DG632v3

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Click the Services link near the left of the page.

Netgear DG632v3

Near the center of the page click the Add Custom Service button.

Netgear DG632v3

You need to name this entry in the Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.

If you are only forwarding a single port number then enter that number into both the Port Start and the Port End boxes. If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Port Start box and the highest number of that range into the Port End box.

When you are all done click the Apply button.

Near the left of the page click the Firewall Rules link.

Netgear DG632v3

Click the Inbound Services Add button near the center of the page.

Netgear DG632v3

Enter the IP address to forward these ports to into the LAN Server IP Address box. If you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box.

Pick the service you created from the Services dropdown box.

Click the Apply button when you are finished.

Test if Your Ports are Open

Now that you have forwarded ports on the Netgear DG632 v3 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netgear DG632 v3 Router Screenshots

We also have the Internets largest collection of Router Screenshots.