Network Utilities

Easiest Way to Forward Ports on the Netgear FVS124G Router

Netgear FVS124G routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Netgear FVS124G router.
  3. Navigate to the port forwarding section.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Netgear FVS124G router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Netgear FVS124G router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Netgear FVS124G router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Netgear FVS124G

You should see a box prompting you for your username and password.

  • The Default Netgear FVS124G Router Username is: admin
  • The Default Netgear FVS124G Router Password is: password

Enter your username and password, and then click the Login button to log in to your Netgear FVS124G router.

Netgear Usernames and Passwords

If your username and password do not work then please visit our Default Netgear Router Passwords page.

If you still can't login to your router because you forgot your Netgear FVS124G router username and password, use our How to Reset a Router Password guide to set your Netgear FVS124G router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Netgear FVS124G

Click the Services link near the left of the page.

Netgear FVS124G

Near the center of the page click the Add Custom Service button.

Netgear FVS124G

Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.

In the Type box select the protocol that you want to forward these ports over.

If you are just forwarding a single port number then you can simply enter that same number into both the Start Port and the Finish Port boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start Port box and then enter highest number into the Finish Port box.

Click the Rules link near the left of the page.

Netgear FVS124G

You can click either the Outbound or Inbound Services Add button.

Netgear FVS124G port forward

Select the service you created from the Service dropdown box.

Select ALLOW always from the Action dropdown box.

You need to enter the IP address that you are forwarding ports to in the Send to LAN Server box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

Use the WAN Users dropdown box to choose Any.

Choose Never from the Log dropdown box.

When you are finished, click the Apply button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Netgear FVS124G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Netgear FVS124G Router Screenshots

We also have the Internets largest collection of Router Screenshots.