Network Utilities

Forwarding Ports in a Sierra Wireless MC7710 Router

Sierra Wireless MC7710 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Sierra Wireless MC7710 router.
  3. Navigate to the port forwarding section.
    • Click the Switch to Advanced View link.
    • Click the Service link.
    • Click on Routing.
    • Click on NAT.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Sierra Wireless MC7710 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Sierra Wireless MC7710 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.10.50

In the picture above the address bar has 192.168.10.50 in it. Just replace all of that with the IP address of your Sierra Wireless MC7710 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.10.50

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Sierra Wireless MC7710

Click the Switch to Advanced View link near the bottom of the page.

Sierra Wireless MC7710

You should see a box prompting you for your username and password.

  • The Default Sierra Wireless MC7710 Router Username is: admin
  • The Default Sierra Wireless MC7710 Router Password is: blank

Enter your username and password, and then click the Login button to log in to your Sierra Wireless MC7710 router.

Sierra Wireless Usernames and Passwords

If your username and password do not work then please visit our Default Sierra Wireless Router Passwords page.

If you still can't login to your router because you forgot your Sierra Wireless MC7710 router username and password, use our How to Reset a Router Password guide to set your Sierra Wireless MC7710 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Sierra Wireless MC7710

Click the Service link near the top of the page.

You should now see a new menu. In this new menu, click Routing.

You should now see a new menu. In this new menu, click NAT.

Sierra Wireless MC7710 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

The protocol that you want to forward is selected from the Protocol box.

If you are forwarding a single port, enter that port number into both of the Incoming Port Range and both of the Destination Port Range boxes. If you are forwarding a range of ports, enter the lowest number of that range into the left hand Incoming Port Range and Destination Port Range boxes. Then enter the highest number of that range into the right hand Incoming Port Range and Destination Port Range boxes.

Enter the IP address that you are forwarding ports to in the Destination IP Address box. This is either the IP address of a computer or the IP address of another device on your network.

When you are all done click the Save NAT button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Sierra Wireless MC7710 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Sierra Wireless MC7710 Router Screenshots

We also have the Internets largest collection of Router Screenshots.