Network Utilities

Simple Symantec 200R Router Open Port Guide

Symantec 200R routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Symantec 200R router.
  3. Navigate to the port forwarding section.
    • Click the Custom Virtual Servers link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Symantec 200R router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Symantec 200R router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Symantec 200R router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Symantec 200R

You should see a box prompting you for your username and password.

  • The Default Symantec 200R Router Username is: admin
  • The Default Symantec 200R Router Password is: password

Enter your username and password, and then click the Login button to log in to your Symantec 200R router.

Symantec Usernames and Passwords

If your username and password do not work then please visit our Default Symantec Router Passwords page.

If you still can't login to your router because you forgot your Symantec 200R router username and password, use our How to Reset a Router Password guide to set your Symantec 200R router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Symantec 200R

Click the Custom Virtual Servers link near the left of the page.

Symantec 200R port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded is be a good idea.

Make sure that the Enable checkbox is checked.

Enter the IP address that you want to forward these ports to into the Server LAN IP box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

Select the required protocol for these ports from the Protocol dropdown box.

If you are forwarding a range of ports, enter the lowest number of the range into the Internal Port Range Start and External Port Range Start boxes. Then enter the highest number of the range into the Internal Port Range Finish and External Port Range Finish boxes. If you are forwarding a single port, enter that port number into the Internal Port Range Start, Internal Port Range Finish, External Port Range Start and External Port Range Finish boxes.

When you are all done click the Add button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Symantec 200R you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Symantec 200R Router Screenshots

We also have the Internets largest collection of Router Screenshots.