TP-Link Archer C60 v2.0 Router Open Port Guide

Thumbnail image of Port Forward Staff
Port Forward Staff
September 23, 2019 (Last Updated: ) | Reading Time: 5 minutes

Your Archer C60 v2.0 router helps to protect your network by blocking incoming internet connections. This is an important feature that helps you to control which applications have access to your network. Sometimes you want to allow network access to a specific application in order to play a game, connect a device, or use an app. The TP-Link Archer C60 v2.0 can unblock certain incoming connections through port forwarding or by opening a port. You can open ports in your Archer C60 v2.0 by assigning specific ports to an IP address. Forwarding these ports directs incoming data to a specific device or application.

Follow the steps below to open ports in your TP-Link Archer C60 v2.0 router:

  1. Set up a static IP address on the device or computer you are forwarding these ports to.
  2. Login to your TP-Link Archer C60 v2.0 router.
  3. In your TP-Link Archer C60 v2.0 router, navigate to the Virtual Servers section.
    • Click the Advanced tab, which is at the top of the screen.
    • Find the NAT Forwarding tab located near the left of the screen and click on it.
    • Click on Virtual Servers.
  4. Create a Virtual Servers entry.

The process of opening ports in your router may seem like a difficult task. If so, you are not alone! We are here to help walk you through the steps to open a port in the TP-Link Archer C60 v2.0 router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1 - Setup A Static IP Address

In order to ensure that your ports remain open in your device even after it reboots, it is important to set up a static IP address in your device.

After setting up a static ip address on your devices you need to login to your router.

Step 2 - Login To Your TP-Link Router

The TP-Link Archer C60 v2.0 router uses a web interface to display router settings. In order to login to the TP-Link Archer C60 v2.0 router you need to use a web browser.

Open your favorite web browser. If you don't have a favorite or are not sure what this means, open up Chrome, Firefox, or Edge. If you are already in a browser window, go ahead and open up a new tab.

We have simplified this step for you with this link: Login to your Archer C60 v2.0 Router

Find the address bar in your browser window. This is usually found at the top of the page, like in the image below.

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your web browser and type in your router's IP address.

The TP-Link Archer C60 v2.0 router's default IP address is: 192.168.0.1

After typing your router's IP address into the address bar, make sure to click the enter button on your keyboard. You should see a box similar to the one shown below.

login
This is the login page from your TP-Link Archer C60 v2.0 router.

Enter the username and password for your TP-Link Archer C60 v2.0 router. Note: If you have changed these numbers in the past, you will need to enter in the those values.

Once you have entered your username and password, remember to click the Log In button to login to your TP-Link Archer C60 v2.0 router.

TP-Link Usernames and Passwords

If the username and password did not work I recommend checking out our Default TP-Link Router Passwords page.

If, after trying the above list of passwords you still can't login you may need to consider a reset for your router. Learn how to do that by reading our How to Reset a Router guide. After resetting the TP-Link Archer C60 v2.0 router your username and password are reverted back to factory defaults.

Step 3 - Find The Port Forwarding Section

After successfully logging in to your TP-Link Archer C60 v2.0 router you should see the router's home page on your screen. Find the Virtual Servers section of your router.

home
home

You should now be on a page that says Virtual Servers.

port forwarding
This is the port forwarding page from your TP-Link Archer C60 v2.0 router.

Step 4 - Create A Port Forward Entry

Make sure that you must open a port in your router before doing so since this will allow data to come through the firewall portion of your router to a specific device. It is possible that this could lead to malicious traffic on your network. However, don't let this warning stop you from making this change if you need it because the risk is very low.

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

port forwarding
This is the port forwarding page from your TP-Link Archer C60 v2.0 router.
  1. Click the button labeled Add.

  2. Make up a name to put in the Service Type box. The name does not have any effect on the functionality of the forward; it's simply there so you can know why it was created.

  3. If you are forwarding a single port number, enter it into the External Port box. If you are forwarding a range of ports, enter the lowest number of that range into the External Port box, followed by a hyphen followed by the largest number. For example, a range of port numbers might look like this: 1000-2000.

  4. Find the Internal IP box and enter the IP address that you want ports forwarded to. This can be either the IP address of your computer or any other IP address for devices on your network that you want to forward ports for.

  5. Leave Internal Port blank.

  6. Use the Protocol dropdown box to select the protocol type of the ports you are forwarding. If your router has the option of Both, then choose that. Otherwise, choose either TCP or UDP as needed. If you need to forward a port for both TCP and UDP and your router does not have Both, then you have to create two entries.

  7. Make sure that the box called Enable This Entry is checked.

  8. Make sure to click the Save button at the bottom of the page to apply these changes, when you are completely finished.

Test Your Ports To See If They Are Open

Use our Network Utilities software, (which includes a free Open Port Checker tool) to test your network to see if you have forwarded ports in the TP-Link Archer C60 v2.0 router correctly. Open Port Checker is the only online port checking tool that has Guaranteed Results.

More Guides To Check Out:

More From Portforward