Network Utilities

Easiest Way to Forward Ports on the TrendChip HG520 Router

TrendChip HG520 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your TrendChip HG520 router.
  3. Navigate to the port forwarding section.
    • Click the Advanced Setup button.
    • Click on NAT.
    • Click the Virtual Server link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your TrendChip HG520 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your TrendChip HG520 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your TrendChip HG520 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

TrendChip HG520

You should see a box prompting you for your username and password.

  • The Default TrendChip HG520 Router Username is: admin
  • The Default TrendChip HG520 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your TrendChip HG520 router.

TrendChip Usernames and Passwords

If your username and password do not work then please visit our Default TrendChip Router Passwords page.

If you still can't login to your router because you forgot your TrendChip HG520 router username and password, use our How to Reset a Router Password guide to set your TrendChip HG520 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

TrendChip HG520

Click the Advanced Setup button near the top of the page.

You should now see a new menu. In this new menu, click NAT.

TrendChip HG520

Click the Virtual Server link near the bottom of the page.

TrendChip HG520 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Use the Rule Index dropdown box to pick an empty rule.

Create a name for this forward and put it in the Application box. The name is only used as a reminder and has no effect on the port forward.

Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.

If you are just forwarding a single port number then you can simply enter that same number into both the Start Port Number and the End Port Number boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Start Port Number box and then enter highest number into the End Port Number box.

Enter the IP address that you want to forward these ports to into the Local IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

Click the Local IP Address button when you are done.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the TrendChip HG520 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

TrendChip HG520 Router Screenshots

We also have the Internets largest collection of Router Screenshots.