Ubee DVW32C1 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Ubee DVW 32C1 router.
- Navigate to the port forwarding section.
- Click the Advanced link.
- Click on Forwarding.
- Click the Create IPv4 button.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Ubee DVW32C1 router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Ubee DVW32C1 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Ubee DVW 32C1 IP Address is: 192.168.1.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
Look for your password on the bottom of your router or in the paperwork that came with your router.
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Forwarding.
Click the Create IPv4 button near the center of the page.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Enter the IP address that you are forwarding ports to in the Local IP box. This is either the IP address of a computer or the IP address of another device on your network.
If you are forwarding a range of ports then you need to enter the lowest number of the range into the Local Start Port and External Start Port boxes and the highest number of the range into the Local End Port and External End Port boxes. If you are only forwarding a single port then you can enter that same port number into the Local Start Port, Local End Port, External Start Port and External End Port boxes.
In the Protocol box select the protocol that you want to forward these ports over.
You need to name this entry in the Description box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
Use the Enabled dropdown box to pick On.
When you are finished, click the Apply button.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Ubee DVW32C1 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Ubee DVW32C1 Router Screenshots
We also have the Internets largest collection of Router Screenshots.