Fastest Ubiquiti NanoStation M5 Router Port Forwarding Steps

Thumbnail image of Port Forward Staff
Port Forward Staff
September 19, 2018 (Last Updated: ) | Reading Time: 3 minutes

Ubiquiti NanoStation_M5 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Ubiquiti NanoStation M5 router.
  3. Navigate to the port forwarding section.
    • Click the Network button.
    • Click the Port Forwarding Configure button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Ubiquiti NanoStation_M5 router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.

Step 2

Now we are going to login to your Ubiquiti NanoStation_M5 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.

The default Ubiquiti NanoStation M5 IP Address is: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Ubiquiti NanoStation_M5
Screenshot of Ubiquiti NanoStation_M5.

You should see a box prompting you for your username and password.

Enter your username and password, and then click the Login button to log in to your Ubiquiti NanoStation_M5 router.

Ubiquiti Usernames and Passwords

If your username and password do not work then please visit our Default Ubiquiti Router Passwords page.

If you still can't login to your router because you forgot your Ubiquiti NanoStation_M5 router username and password, use our How to Reset a Router Password guide to set your Ubiquiti NanoStation_M5 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Ubiquiti NanoStation_M5
Screenshot of Ubiquiti NanoStation_M5.

Click the Network button near the top of the page.

Ubiquiti NanoStation_M5
Screenshot of Ubiquiti NanoStation_M5.

Click the Port Forwarding Configure button near the center of the page.

Ubiquiti NanoStation_M5 port forward
Screenshot of Ubiquiti NanoStation_M5 port forward.

Step 4

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

Enter the IP address to forward these ports to into the Private IP box. If you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box.

Enter the port to forward into the Private Port and the Public Port boxes.

Use the Type dropdown box to select the protocol type of the ports you are forwarding.

Leave Source IP/mask set to 192.168.0.1/0.

Make up a name to put in the Comment box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.

Make sure that the Enabled checkbox is checked.

When you're finished, click Save near the bottom of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Ubiquiti NanoStation_M5 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Ubiquiti NanoStation_M5 Router Screenshots

We also have the Internets largest collection of Router Screenshots.

More From Portforward