Umax SWC-9200 Router Open Port Guide
Umax SWC-9200 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Umax SWC-9200 router.
- Navigate to the port forwarding section.
- Click the Application button.
- Click on DMZ & Port Forwarding.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Umax SWC-9200 router.
When you use Network Utilities you get your port forwarded right now!
- Recommended - Our free program will setup a static IP address for you.
- → Download Network Utilities today!
- Or follow our Static IP Address guides to setup a static IP address.
After setting up a static ip address on your devices you need to login to your router.
Now we are going to login to your Umax SWC-9200 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.3.1 in it. Just replace all of that with the IP address of your Umax SWC-9200 router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.3.1
You should see a box prompting you for your username and password.
- The Default Umax SWC-9200 Router Username is: user
- The Default Umax SWC-9200 Router Password is: user
Enter your username and password, and then click the Login button to log in to your Umax SWC-9200 router.
Umax Usernames and Passwords
If your username and password do not work then please visit our Default Umax Router Passwords page.
If you still can't login to your router because you forgot your Umax SWC-9200 router username and password, use our How to Reset a Router Password guide to set your Umax SWC-9200 router back to its factory settings.
Click the Application button near the top of the page.
You should now see a new menu. In this new menu, click DMZ & Port Forwarding.
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Put a name for this forward in the Name box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.
Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.
If you are forwarding a range of ports, enter the lowest number of the range into the Incoming Start Port and Forward Start Port boxes. Then enter the highest number of the range into the Incoming End Port and Forward End Port boxes. If you are forwarding a single port, enter that port number into the Incoming Start Port, Incoming End Port, Forward Start Port and Forward End Port boxes.
Enter the IP address that you want to forward these ports to into the Destination IP box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
When you are all done click the Add button.
When you're finished, click Apply near the bottom of the screen to save your changes.
Test if Your Ports are Open
Now that you have forwarded ports on the Umax SWC-9200 you should test to see if your ports are forwarded correctly.
Umax SWC-9200 Router Screenshots
We also have the Internets largest collection of Router Screenshots.