Network Utilities

Fastest UTStarcom WA3002-g1 Router Open Port Instructions

UTStarcom WA3002-g1 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your UTStarcom WA3002-g1 router.
  3. Navigate to the port forwarding section.
    • Click the Advanced Setup link.
    • Click the NAT link.
    • Click the Virtual Server link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your UTStarcom WA3002-g1 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your UTStarcom WA3002-g1 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your UTStarcom WA3002-g1 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

UTStarcom WA3002-g1

You should see a box prompting you for your username and password.

  • The Default UTStarcom WA3002-g1 Router Username is: admin
  • The Default UTStarcom WA3002-g1 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your UTStarcom WA3002-g1 router.

UTStarcom Usernames and Passwords

If your username and password do not work then please visit our Default UTStarcom Router Passwords page.

If you still can't login to your router because you forgot your UTStarcom WA3002-g1 router username and password, use our How to Reset a Router Password guide to set your UTStarcom WA3002-g1 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

UTStarcom WA3002-g1

Click the Advanced Setup link near the top of the page.

UTStarcom WA3002-g1

Click the NAT link near the top of the page.

UTStarcom WA3002-g1

Click the Virtual Server link near the bottom of the page.

UTStarcom WA3002-g1 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Use the Rule Index dropdown box to pick an available line number.

Put a name for this forward in the Application box so that you can remember why you set this forward up. The name does not matter so pick something that has meaning to you.

If you are forwarding a single port, enter that port number into the Start Port Number and the End Port Number boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port Number box. Then enter the highest number of that range into the End Port Number box.

Enter the IP address that you want to forward these ports to in the Local IP Address box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.

Click the Save button when you are finished.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the UTStarcom WA3002-g1 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

UTStarcom WA3002-g1 Router Screenshots

We also have the Internets largest collection of Router Screenshots.