Network Utilities

Simple Westell D90-740010-06 Router Open Port Guide

Westell D90-740010-06 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your Westell D90-740010-06 router.
  3. Navigate to the port forwarding section.
    • Click the Configuration button.
    • Click the define custom service button.
    • Click the Port Forwarding Ranges of Ports radio button.
    • Click the Next button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Westell D90-740010-06 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Westell D90-740010-06 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.1

In the picture above the address bar has 192.168.1.1 in it. Just replace all of that with the IP address of your Westell D90-740010-06 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Westell D90-740010-06

You should see a box prompting you for your username and password.

  • The Default Westell D90-740010-06 Router Username is: admin
  • The Default Westell D90-740010-06 Router Password is: password

Enter your username and password, and then click the Login button to log in to your Westell D90-740010-06 router.

Westell Usernames and Passwords

If your username and password do not work then please visit our Default Westell Router Passwords page.

If you still can't login to your router because you forgot your Westell D90-740010-06 router username and password, use our How to Reset a Router Password guide to set your Westell D90-740010-06 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Westell D90-740010-06

Click the Configuration button near the top of the page.

Westell D90-740010-06

Click the define custom service button near the bottom of the page.

Westell D90-740010-06

Put a dot into the Port Forwarding Ranges of Ports radio button.

Click the Next button near the bottom of the page.

Westell D90-740010-06

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Create a name for this forward and put it in the Service Name box. The name is only used as a reminder and has no effect on the port forward.

If you are just forwarding a single port number then you can simply enter that same number into both the Base Host Port, Left Global Port Range and the Right Global Port Range boxes. If you are forwarding a range of ports, usually separated by a hyphen, then you need to enter the lowest number of that range into the Base Host Port, Left Global Port Range box and then enter highest number into the Right Global Port Range box.

Select the protocol type using the Protocol radio button. If you need both TCP and UDP then create a duplicate configuration.

The first configuration needs to have TCP selected while the second one has UDP selected.

When you are all done click the Next then Close button.

Westell D90-740010-06

Select the application you created using the Service Name drop down box. Then click Enable to enable it.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Westell D90-740010-06 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Westell D90-740010-06 Router Screenshots

We also have the Internets largest collection of Router Screenshots.