Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Port Forwarding for the 2wire 1800hw


What is Port Forwarding?
What is Port Triggering?




 



Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.254.




Click the Firewall button.


Click the Firewall Settings button.


Use the Select a computer box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network. Click the Add a new user-defined application link.


  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Burnout Revenge requires you to forward the 3658,3659,10070,10080,31800-31899 ports. Go ahead and enter the settings shown above into the Edit Application menu and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

  Application Name:  
  Protocol: TCP UDP   
  Port (or Range): From: To:   
  Protocol Timeout (seconds): TCP default=86400
UDP default=600		   
  Map to Host Port: Default= the same port as
defined above		   

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

Click the Back button.


Select the applications you just created in the Applications list, then click the Add button to move them to the Hosted Applications box.

When you are finished, click the Done button at the bottom of your screen.

And that is it! You are done!