Before we can forward ports for BYOND's pager, we need to figure out what ports BYOND's pager is using. Here is a brief walkthrough on how to do that. Go ahead and open up Dream Seeker.

Click Options in the menu at the top of your screen. In the list that drops down click Preferences.

Click Pager tab at the top of this new window. You should now see the menu shown in the screenshot above. Enter a port number into the Pager Port box. It doesn't really matter what port you choose, but something between 10000 and 16000 would be a good idea. Please enter the port you chose into the box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 10.0.0.138.

	Application Name:
	Protocol:	TCP		UDP
	Port (or Range):	From:		To:
	Protocol Timeout (seconds):			TCP default=86400 UDP default=600
	Map to Host Port:			Default= the same port as defined above

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BYOND Dream Seeker requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Edit Application menu and then click Add Definition.

	Application Name:
	Protocol:	TCP		UDP
	Port (or Range):	From:		To:
	Protocol Timeout (seconds):			TCP default=86400 UDP default=600
	Map to Host Port:			Default= the same port as defined above

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit Application page. Go ahead and enter those settings and then click Add Definition.

When you are finished, click the Done button at the bottom of your screen.

And that is it! You are done!