Port Forwarding PS3 NBA 2K11 on the 3com 3CP4130
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.200.254.
You should see a box prompting you for your username and password. Enter your username and password now.
By default the username is admin, and the password is 1234. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above did not work for you.
Click the Configuration link near the left of the page.
Click the Remote Site Profiles button near the center of the page.
There is most likely only one option in the list on this page. Go ahead and click it, then click Modify.
Click the Next button near the bottom of the page.
Clicking the TCP or UDP button on this page will bring you to the page that we will use to forward ports.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. PS3 NBA 2K11 requires you to forward the 53,80,88,1745,1795,3064,3074 ports. If the text above says UDP instead of TCP, go back to the previous page and select UDP to get the proper configuration page. Go ahead and enter the settings shown above into the Remote Site Name: add menu and then click Add.
| ||
 |
Remote Site Name: Add | |
| Public TCP Port: | ||
| Private IP Address: | ||
| Private TCP Port: | ||
| ||
You should see another page of settings that need to be entered into one of the blank lines on your routers Remote Site Name: add page. If the text above says UDP instead of TCP, go back to the previous page and select UDP to get the proper configuration page. Go ahead and enter those settings and then click Add.
|
| ||
|
Remote Site Name: Add | |
| Public UDP Port: | ||
| Private IP Address: | ||
| Private UDP Port: | ||
|
| ||
You should see another page of settings that need to be entered into one of the blank lines on your routers Remote Site Name: add page. If the text above says UDP instead of TCP, go back to the previous page and select UDP to get the proper configuration page. Go ahead and enter those settings and then click Add.
|
| ||
|
Remote Site Name: Add | |
| Public UDP Port: | ||
| Private IP Address: | ||
| Private UDP Port: | ||
|
| ||
When you're finished, click Save Configuration near the left of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
