Simple Instructions to Help Setup a Port Forward on the 1net1 R-90 Router

Thumbnail image of Port Forward Staff
Port Forward Staff
October 14, 2016 (Last Updated: ) | Reading Time: 4 minutes

Most routers come from the factory with a basic firewall, the 1net1 R-90 router is no different. This is to protect your home network from undesired access from the Internet. A firewall blocks incoming connections and sometimes you need to get a connection that by default is blocked by your firewall. To open a connection is to open a port. This is also called port forwarding because you are allowing everything on that port to be forwarded directly to your home network.

The steps involved are:

If this sounds difficult at first, don't worry, I'll walk you through all the steps to forward a port on the 1net1 R-90 router.

We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

NordVPN birthday deal!

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Step 2

It's time to login to the 1net1 R-90 router. To do this you need to use a web browser because the 1net1 R-90 router uses a web interface. It shouldn't matter what web browser you use. Common ones to use are Chrome, Firefox, Safari, Internet Explorer.

Go ahead and open up the web browser of your choice and find the address bar along the top of the screen. It looks like this:

Image of a browser address bar
Browser address bar

Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.

The default 1net1 R-90 IP Address is:

Press the enter button on your keyboard. That should direct you to the following screen:

1net1 1net1_R-90
Screenshot of 1net1 1net1_R-90.

You should see a blue box prompting you for the correct username and password.

After entering the correct username and password, click the Login button to access the 1net1 R-90 router web interface.

1net1 Usernames and Passwords

If you find that the username and password did not work then try visiting our Default 1net1 Router Passwords page.

If you are still unable to access your router's web interface you probably changed your password at some time in the past and have forgotten. It may be time to consider resetting the 1net1 R-90 router back to the original factory defaults. Read this guide to learn more.

Step 3

Once you have successfully logged into the 1net1 R-90 router you need to make your way to the port forwarding section. The following image is of the 1net1 R-90 Home page.

1net1 1net1_R-90
This is the status page from your 1net1 router.

In this router you have two different options for forwarding ports. One allows you to forward a range of ports and the other option allows you to forward a single port. If you are forwarding a range of ports, click Multi Port Forwarding in the left sidebar under Advanced. If you are forwarding a single port, click Single Port Forwarding under the Advanced heading. Below is the Single Port Forwarding screenshot.

1net1 1net1_R-90
Screenshot of 1net1 1net1_R-90.

Step 4

Here are the ports to forward for Xbox Live:

  • TCP Ports: 3074
  • UDP Ports: 3074

If you are looking for the ports for a different application you can find it by either:

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Forwarding a Single Port

Use the Protocol dropdown box to select the protocol type of the ports you are forwarding.

Enter the port to forward into the src Port and the Des Port boxes.

Enter the IP address that you want to forward these ports to in the Server IP Address box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.

1net1 1net1_R-90 port forward
Screenshot of 1net1 1net1_R-90 port forward.

Forwarding a Port Range

The protocol that you want to forward is selected from the Protocol box.

Enter the port to forward into both the Port Start and the End Port boxes.

Enter the IP address that you want to forward these ports to in the Server IP Address box. You can enter either the IP address of your computer or the IP address of another computer or device on your network.

And that is it. Click the Apply button at the bottom of the page and you are finished.

Test if Your Ports are Open

After you have finished forwarding the ports on the 1net1 R-90 router you need to test them in order to see if they forwarded correctly.

In our Network Utilities tool we have a free Open Port Checker you can use to see if your ports have been forwarded correctly. Our Open Port Checker tool is the ONLY online port checking tool with Guaranteed Results.

More Guides You May Be Interested In

More From Portforward