Network Utilities

How to Forward Ports in a 2wire 2700HG-D Router

This is the open port guide for the 2wire 2700HG-D. We also have the following related guides:

Pick the guide that most closely matches your router.

2wire 2700HG-D routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your 2wire 2700HG-D router.
  3. Navigate to the port forwarding section.
    • Click the Firewall button.
    • Click the Firewall Settings button.
    • Use the Select a computer to select the device to forward ports to.
    • Click the Add a new user-defined application link.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your 2wire 2700HG-D router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your 2wire 2700HG-D router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


gateway.2wire.net

In the picture above the address bar has gateway.2wire.net in it. Just replace all of that with the IP address of your 2wire 2700HG-D router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: gateway.2wire.net

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Look for your password on the bottom of your router or in the paperwork that came with your router.

2wire 2700HG-D

Click the Firewall button.

2wire 2700HG-D

Click the Firewall Settings button.

2wire 2700HG-D

Use the Select a computer box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.

Click the Add a new user-defined application link.

2wire 2700HG-D

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Make up a name to put in the Application Name box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.

Select the protocol type using the Protocol radio button. If you need both TCP and UDP then create a duplicate configuration.

The first configuration needs to have TCP selected while the second one has UDP selected.

If you are forwarding a single port, enter that port number into the Port (or Range) From and the Port (or Range) To boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Port (or Range) From box. Then enter the highest number of that range into the Port (or Range) To box.

Use the Protocol Timeout (seconds) box you need to enter a protocol timeout. Unless you have a reason to use different numbers then you should use the default protocol timeouts: 86400 for TCP and 600 for UDP.

You can leave the Map to Host Port box empty.

Leave Application Type set to None.

Click the Add Definition button.

Click the Back button.

2wire 2700HG-D

Select the applications you just created in the Applications list, then click the Add button to move them to the Hosted Applications box.

When you are finished, click the Done button at the bottom of your screen.

Test if Your Ports are Open

Now that you have forwarded ports on the 2wire 2700HG-D you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

2wire 2700HG-D Router Screenshots

We also have the Internets largest collection of Router Screenshots.